Boiler Installation in Warrendale, PA

Warrendale winters are long, damp, and hard on heating equipment. When the temperature drops into the teens and the wind comes across the ridges, your boiler runs almost nonstop for months at a time. That kind of workload wears parts down faster than most homeowners expect.

If your system is limping along, consider a replacement rather than another repair. Spurk AC, Furnace & Boiler Repair has been handling boiler installation in Warrendale, PA since 2018, and we walk you through every option before anything gets ordered. You get straight answers, fair pricing, and a system sized right for your home.

We work on residential and commercial boilers. We are fully licensed and insured, and we back every job with a 100% guarantee.

Our Services

Contact Us

First Name

Last Name

Phone Number

Email Address

Message

Acceptance

By submitting this form and signing up for texts, you consent to receive text messages from Spurk AC, Furnace & Boiler Repair at the number provided, including messages sent by the auto dialer. Consent is not a condition of purchase. Msg & data rates may apply. Msg frequency varies. Unsubscribe at any time by replying STOP to 878-332-2960 or clicking the unsubscribe link (where available), and no further messages will be sent. Reply HELP for help. See Privacy Policy & Terms.

What Your Neighbors Are Saying About Us

When my 25+ year old furnace quit running, I placed phone calls to a few local HVAC contractors. Shortly after leaving a message with Spurk, Lisa promptly returned my call and told me a technician (Chuck) would arrive within a few hours to diagnose the problem. Chuck discussed my options and recommended a furnace replacement.

Nick was awesome. He was very thorough and explained everything to me about my furnace repair. I will have him back soon to do my furnace maintenance. I called in the morning and early that afternoon the same day, Nick my technician was here. Minor issue but he got our furnace running quickly.

Charlie was at my home for a maintenance visit, and he was great!! I did not feel pressured to complete any work or repairs on my system. He gave me a full report of my system and talked me through the findings. He even talked me into a membership so I can be more diligent with my system. Great service, great company!!

Spurk replaced our old original heating and air conditioning systems. The Techs did a great job both the attic (it had to be hot up there) and basement systems over several days. Everyone was very polite, prompt and professional. We have used them for previous services, so surprises there. Thank you to the whole Spurk team!

We moved in here about a year ago and had not had AC checked. Spurk servicemen showed up and worked diligently (on likely the hottest day of the year) their whole time here. They found some issues that would have led to system shut down. Fixed that.

Top to bottom Spurk HVAC, LLC gets the job done to your satisfaction. The quote process was easy and simple, and Ethan in the front office was very helpful when it came to explanation and suggestion. Because they’re in the upper echelon of mini split installers, he was able to model out my basement to find the perfect sizing for the job.

Signs You Need a New Boiler

Most boilers give you plenty of warning before they quit for good. Here is what usually shows up first.

The boiler is older than 15 years
Rising gas bills
Uneven heat between rooms
Frequent repair calls
Banging or gurgling sounds
Visible rust or leaking
Pilot light trouble
Radiators are slow to warm up

If two or more of these sound familiar, a replacement is usually the smarter spend. Repairs on an aging boiler tend to add up quickly, and the money often goes toward a new unit.

Boiler Options to Fit Your Home

Not every Warrendale home needs the same setup. Older houses in the area often run cast-iron boilers that have been in place for decades, and those homes usually do well with a high-efficiency gas boiler that keeps the existing radiator or baseboard layout intact. You get better fuel use without tearing the whole system apart.

Newer builds and homes with tighter mechanical spaces are often a better fit for a wall-mounted condensing boiler. These units take up far less room, run more quietly, and extract more heat from the same amount of fuel. Many homeowners pair one with a domestic hot water setup, so the boiler handles both heating and hot water.

We also install combi boilers for homes that want to free up space by removing a separate water heater, along with oil and electric options when natural gas is not available. During the visit, we look at square footage, insulation, window quality, radiator or baseboard capacity, and how your home actually holds heat. Sizing matters more than brand: an oversized boiler short-cycles, wastes fuel, and wears out early.

Our Boiler Installation & Replacement Process

Everything starts with an in-home evaluation. We look at your current system, check your venting and gas line, measure the space, and ask how your home has been performing. If certain rooms never get warm or your bills jumped last winter, that tells us something useful before we recommend anything.

From there, we give you written options with real numbers attached. You will know what each system costs, what it should do for your comfort and energy use, and what the tradeoffs are. We explain it in plain language so you can make the call yourself, and we never pressure anyone into the biggest ticket on the page.

Once you choose, we schedule the work and handle permits and inspection requirements. On install day, we protect your floors, drain and remove the old unit, set the new boiler, and complete the piping, venting, and controls to code. Most standard swaps wrap up in a day, while more involved jobs with new piping or custom work may run into a second day.

Before we leave, we fire up the system, purge air from the lines, balance the loop, and confirm that every zone is heating as it should. Then we walk you through the thermostat, the shutoffs, and the basic maintenance schedule. If something feels off in the first few weeks, call us, and we’ll come back.

Benefits of Upgrading Your Boiler

The first thing most homeowners notice is the bill. Older boilers in this area often run at 60 to 70 percent efficiency, while a modern condensing unit can reach the mid- to high 90s. That difference shows up every month from October through April, which is a long heating season in Southwestern Pennsylvania.

Comfort improves, too. Newer boilers maintain a steadier temperature rather than swinging between too warm and too cool, and zoning lets you keep bedrooms, living areas, and finished basements at the temperatures that actually make sense for how you use them. Cold spots in back rooms and over garages usually disappear.

There is also the reliability side. A new boiler under warranty means no scrambling for a repair on a 10-degree January night, and no wondering whether the old unit will make it through another season. Newer sealed combustion units vent more safely as well, which matters in tight basements and utility closets.

Humidity is worth mentioning here. Our region stays damp for much of the year, and basements around Warrendale hold moisture even in winter. A properly running boiler with proper venting keeps moisture from condensing on cold metal, which slows rust and corrosion that shorten equipment life.

Why Choose Spurk AC, Furnace & Boiler Repair

Homeowners across Warrendale and Southwestern Pennsylvania call us because we keep it simple and do the job right.

Local since 2018
Licensed and fully insured
Hundreds of five-star reviews
100% guarantee on work
Emergency service available
Honest, no pressure recommendations
Custom ductwork fabrication in-house
Options for every budget

We built this company on word of mouth, and that only works if we treat every home the way we would want ours treated. That has not changed as we have grown.

Frequently Asked Questions

How long does boiler installation take?

Most standard boiler replacements in Warrendale are completed in one day. Jobs that involve new piping, venting changes, custom work, or a fuel switch may run into a second day. Either way, we protect your floors, remove the old unit, and fire up and test the new system before we leave, so your home isn’t without heat any longer than necessary.

How much does boiler replacement in Warrendale, PA cost?

The cost depends on the boiler’s size, fuel type, efficiency rating, and how much piping work your home needs. We provide written pricing after an in-home evaluation, so you’ll see real numbers and the tradeoffs of each option before you decide. Check our current specials for ways to save, and ask about our financing options to spread the cost of a new system over time.

How long should a boiler last?

Most boilers last 15 to 20 years with regular maintenance. Cast-iron units, common in older Warrendale homes, often run longer, but their efficiency drops well before they fail. Because Southwestern Pennsylvania heating seasons stretch from October through April, an aging boiler can cost you more in fuel and repairs than it’s worth, even if it’s still running.

Can I keep my existing radiators?

In most cases, yes. Radiators and baseboards usually work well with a new high-efficiency boiler as long as the system is sized and balanced correctly. For many older homes in the area, that means you get better fuel use and steadier heat without tearing out your existing layout.

Do you offer emergency service if my boiler quits?

Yes. We provide emergency heating service, which matters when a Warrendale cold snap hits and your home starts losing heat fast. If your boiler fails and replacement is the best option, we’ll walk you through your choices and get a new system scheduled as quickly as possible.

What type of boiler is right for my Warrendale home?

It depends on your home’s size, layout, fuel source, and how it holds heat. Older homes with cast-iron boilers often do well with a high-efficiency gas boiler that keeps the existing radiators, while newer builds or tighter spaces may suit a wall-mounted condensing unit. We also install combi boilers that handle both heat and hot water, plus oil and electric options when natural gas isn’t available. During the evaluation, we check square footage, insulation, windows, and radiator capacity to size the system correctly.

Do you handle permits and inspections for boiler installation?

Yes. Once you choose your new system, we take care of the permits and inspection requirements for your installation. Our team completes the piping, venting, and controls to code, so you don’t have to coordinate any of it yourself. We’re fully licensed and insured, and every job is backed by our 100% guarantee.

How do I keep my new boiler running efficiently?

Regular maintenance is the best way to protect your investment and keep efficiency high through long Warrendale winters. Annual boiler maintenance catches small issues early, keeps the system balanced, and helps prevent moisture-related rust in damp basements. Our maintenance plans make it easy to stay on schedule each year before heating season starts.